When your furnace breaks down, you need a professional to get it repaired quickly to prevent cold spots. Repairs also help you avoid expensive energy bills and extend the lifespan of your furnace.
Your HVAC technician can clean and replace your blower motor, heat exchanger, limit switch and circuit board. They can also seal ductwork to reduce drafts and save energy, and change your air filter. Contact FURNACE REPAIR CINCINNATI for professional help.
Getting the right parts for your furnace can help keep it working properly and reduce repair costs. This is especially true for newer systems that are more likely to have readily available replacement parts. A furnace that is well maintained by a professional during scheduled maintenance can also have its lifespan extended, which can further lower repair costs.
Furnace problems can range from relatively simple to very complex issues that require the expertise of a trained technician to resolve. Most problems can be prevented with regular cleaning and routine inspections. For example, a dirty air filter can diminish your system’s ability to circulate air, which can cause unpleasant symptoms like stuffy or stale indoor air. It is important to regularly clean furnace components like the heat exchanger and blower fan blades, as well as inspect them for signs of wear and tear.
Changing an air filter is one of the simplest and most cost-effective furnace maintenance tasks you can perform. However, there are more serious issues like a defective gas valve that can be quite difficult to diagnose and fix. A major repair may require a replacement gas valve or other complicated parts, which can be very costly and should only be completed by a professional.
A malfunctioning furnace ignitor is another issue that requires the expertise of a qualified professional to resolve. The ignitor is a thin piece of metal that ignites the furnace fuel. A faulty ignition can cause an increase in electricity bills, reduce energy efficiency and create unsafe conditions for the home’s occupants.
The ignitor can be replaced by a specialist after the heating element is removed from its bracket. Before performing this task, it is essential to shut off the power to the furnace by turning off the breaker box or removing the fuse. This step is crucial because if the ignitor or any other electrical components are turned on while the breaker box is off, they will be damaged.
The circuit board tells the rest of the furnace how to function. A circuit board can often be restored to functionality by resetting it, but when moisture or other factors affect its performance, replacing it is the only solution.
Installation
Furnaces are one of the most significant investments in your home and should be taken care of. The best way to protect this investment is with regular maintenance and repair services. A well-maintained furnace will last up to 20 years, and repairs can save you from the cost of a full replacement. Whether you need to replace parts or perform an extensive repair, the right contractor can help you save money and keep your home comfortable.
If your furnace won’t start, there are a few things you can try before calling for help. First, check the power switch near the furnace. It looks similar to a light switch, and can be accidentally turned off. Also, make sure your thermostat is set to “heat” or “auto,” and that the preferred temperature is higher than the current room temperature. Finally, check the air filter; it may be dirty and needs to be replaced.
A malfunctioning burner can increase electricity bills and cause uncomfortable rooms in your home, so it’s important to schedule a repair as soon as possible. A professional technician can diagnose the problem and resolve it quickly. Depending on your location and climate, you may need to have your burner serviced more frequently.
In addition to replacing and repairing components, the right HVAC company can recommend a new furnace that meets your specific home heating needs. They can also offer duct sealing, cleaning and improvement services, which can improve your home’s energy efficiency and indoor air quality.
Minor Repairs ($100-$300): These include small electrical jobs, thermostat adjustments and flame sensor cleaning. They don’t necessitate substantial labour or expensive parts. Intermediate Repairs ($300-$600): These include fixing ignitors, addressing moderate ducting issues and resolving problems with the blower motor. They require a little more expertise and labour, but are less costly than a replacement.
Ignitor ($350): Responsible for igniting the gas in the furnace. Faulty ignitors are difficult to fix and usually require replacement. Sequencer ($300): Used in electric furnaces to control the sequence of heating elements. A faulty sequencer can disrupt the heating cycle and requires replacement.
Maintenance
Furnace maintenance can reduce energy costs and extend the lifespan of your heating system. This process includes inspecting and cleaning, lubricating moving parts, testing safety controls and calibrating the thermostat.
Checking for clogged filters is an important furnace maintenance task that is often overlooked. Dirty filters reduce airflow, causing your furnace to work harder and decreasing efficiency. It is recommended that you replace your filters every 1-3 months.
If your furnace is making unusual noises, or the pilot light is flickering or going out, a professional technician should be called immediately. This could indicate a malfunctioning burner, or that the heat exchanger has cracked. These are dangerous problems that should be left to a trained professional.
A faulty thermostat is another common problem. This can be corrected by resetting the thermostat or installing a smart thermostat to take advantage of advanced features like programmable schedules and remote control.
The blower motor and other components in your furnace need to be lubricated regularly to reduce friction and wear. A technician will use special grease to keep these areas working smoothly.
Safety controls, including limit switches and sensors, are tested to ensure they will operate correctly if a problem arises. The technician will also examine the wiring for signs of damage or wear.
If you have a gas furnace, the technician will test for safety issues including carbon monoxide leaks. This step is important to ensure your home and family stay safe from harmful emissions.
Attempting DIY furnace repairs is highly discouraged. Even if you are successful, the time spent on DIY repairs is often more costly than simply hiring a professional to complete the job quickly and correctly.
It’s easy to put off a furnace repair, but the longer you wait, the more likely it is that your heating system will experience severe damage. Contact the professionals at AirSouth Cooling & Heating today to schedule your next furnace service. We’ll make sure your heater is ready for the upcoming cold weather. Then you can rest assured knowing that your family will be warm and comfortable throughout the winter.
Repair
When a furnace malfunctions, the system must be fixed promptly to avoid putting your home and family in jeopardy. This can be due to simple wear and tear, accumulated debris, or a complex technical issue that only an experienced professional can identify and address. The good news is that many of these issues can be avoided by regular maintenance and annual inspections performed by a skilled professional.
For example, clogged air filters and dirty ductwork will circulate dust, dirt, pollutants, and allergens throughout your living space. This not only reduces energy efficiency but can also affect indoor air quality and lead to respiratory problems. This is why changing your furnace filter regularly (every 1-3 months depending on usage) and cleaning around your vents is so important.
Inconsistent heating is another common problem and could be the result of a faulty thermostat, a clogged or dirty filter, or even an issue with the furnace itself. A skilled technician can check all the components, clean them, and ensure they are functioning properly to correct this problem.
If you suspect a serious problem, such as a leaking gas line or cracked heat exchanger, you should immediately shut off your gas valve and contact a professional for help. The latter may require an extensive repair and replacement, but will likely save you money in the long run.
Most furnace issues are easy to spot and prevent with a little bit of routine maintenance and annual inspections by a skilled professional. Be sure to pay attention to unusual noises, a lack of warm air, and rising utility bills as these can all be early warning signs of a serious problem.
Most of these tasks can be completed on your own, although some like the blower motor, belt, and heat exchanger should always be handled by a qualified professional to avoid safety risks. Performing these maintenance tasks will help you keep your home and family comfortable, save you energy, and extend the life of your furnace. Contact a skilled HVAC technician today to schedule your next appointment!